Pumps

Table of Contents



Title Page
Rules Etc.
Frames
Assistant Keelsons
Rider Keelsons
Bilge Strakes
Transoms
Breast Hooks and Pointers
Arches
Ceiling
Outside Plank
Diagonal Iron Plates
Beams and Fastenings
Knees
Hold Stanchions
Dead Rise
Chain Plates
Centreboard Case
Limbers
Mast Steps
Rudder Case
Covering Board
Pumps
Shifting Boards
Salting
Ventilators
Water-Tight Bulk-Heads
Solid Floors
Through-Bolts
Bishop Arches
Bowsprits
Garboard Strakes
Degrees of Classification
Measurement
Rule for Calculating
Description of Timber and Plank Allowed to be used in Various Parts of Lake Sail Vessels and Propellers to Class A 1
A Table of Minimum Dimensions of Timber to be Used in Building Sail and Steam Vessels
A Table of Minimum Thickness of the Outside Plank of Sail and Steam Vessels
A Table of Minimum Thickness of the Inside Plank of Sail and Steam Vessels
A Table of Minimum Sizes of Bolts to be Used in Fastening Sail and Steam Vessels
A Table of Minimum Sizes of Chains, Anchors, etc., Adapted to the Tonnage of Lake Sail Vessels Weight of Anchors to be Exclusive of Stocks
Table of Illustrations

All vessels to have at least three good pumps, two aft and one forward, exclusive of bilge pumps. Pumps to be case, and in vessels where the bulk-head forward does not come down to the ceiling, one pump must be cased not less than two by three feet, to receive the suction pipe of the steam pump in case of accident, the case to have a slide at the bottom, that may be readily opened.

 


Previous    Next

Return to Home Port